Dosing Equipment

• Calibration sheet for Huwa-San

  A calibration routine to ensure accurate dosing of Huwa-San using the Select doser.

  Calibration sheet for Huwa-San (PDF)
• Calibration sheet for Select dosers 100CA00

  This sheet and the protocol described can be used to calibrate any Select doser. Use in conjunction with a measuring cylinder (can be supplied by Dosing Solutions).

  Calibration sheet for Select dosers (PDF)
• Horticulture

  Select dosers are being used to dose water cleaning products into the water lines in nurseries and glass houses.

  Below are English and Spanish versions of videos explaining the techniques.
• pH and ORP Equipment

  Equipment for the sensing, alerting and dosing correction of all situations where pH and ORP need to be controlled. This is particularly the case where chlorine is being used as a cleaning agent.

  pH Monitor data sheet (PDF) ORP Monitor (PDF) pH Monitor IFU Aug 20 (PDF) 640 pH IFU v4 (PDF)
• Select-380 Doser

  The high pressure Select Doser for water treatment.

  This versatile doser can be used as a proportional doser taking a pulse from a standard water meter, or pulses from standard Dosing Solutions flow sensors. Dosing into line pressures of up to 5 bar (70 psi), it is the ideal doser for water treatment.

  This is the upgrade version of the Select-360. All of the normal dosing options and ratios are easy to select on-screen as will all other dosers from Dosing Solutions Ltd.

  Select-380 IFU.2 (PDF) Select-380 Data Sheet (PDF)

  Orange tube load from David Welch on Vimeo.
• Select-380 T-Auto 380CA75

  An auto-dosing pump that can be set at any pumping rate from 0 - 4.7 l/hr of dosed product.

  380 T-Auto IFU (PDF) 380 T-Auto Technical Data (PDF)
• Select-382 Split Tandem Doser

  This version of the 380 doser allows for two different products to be pumped at differing ratios. One of the pumps can be slowed so as to act at a smaller dosing ratio compared with the other.

  382 Split Tandem Technical Data (PDF) Select-382 Split Tandem IFU (PDF)
• Select-382 Tandem Doser

  This version of the 380 doser allows for a single product to be pumped at twice the normal rate, or for two different products to be pumped at the same dosing ratio.

  One of the pumps can be slowed to account for any difference in viscosity between the two pumped products.

  382 Technical Data (PDF)
• Select-388 Doser

  This is the ideal doser to use for water treatment when water line pressures are relatively high, the dosed product requirement is low, and two different chemicals are being dosed at different ratios. Ideal for dosing water cleaning products as well as acidification products.

  Select 388 Data Sheet (PDF) 388 IFU (PDF)

  Orange tube load from David Welch on Vimeo.
• Select-480 Doser NO LONGER AVAILABLE

  The classic Select Doser. With many thousands sold all over the world, this is the doser that has defined computer controlled proportional peristaltic dosing.

  Able to deliver micro-litres as well as flow rates up to 15 litres per hour, this doser can be a proportional doser, a single shot doser, a pH doser or even an AutoDoser.

  The Select-480 is being withdrawn due to difficulties is sourcing component parts. The replacement Select-485 will be available shortly, or please consider the Select-640.

  480 IFU (PDF) 480 Technical Data (PDF)
• Select-640 Autodoser

  This format of doser allows for pumping of product at a specific rate. For example, if a waterline has a known flow rate as from a ground water pump, it may be possible to determine the rate at which the Select doser adds product to the line. No flow sensor is needed in this case.

  Select 640 Autodoser (PDF)
• Select-640 Doser - proportional doser

  This heavy-duty intelligent doser is basically a computer controlled peristaltic pump. Depending on how it is programmed it can be a proportional doser adding products such as disinfectants, vaccines, medications or vitamins to water flows. It can also be a single shot doser dispensing specific quantities of liquids as required.

  If you need a product to be dosed at a rate of x ml/hr, the Select-640 can be programmed as an AutoDoser.

  However, if you want to pump a specific amount (1 litre, 120ml etc.) you need the Select-640 SSD (Single Shot Doser).

  640 Technical Data (PDF) Select 640 Livestock IFU (PDF) 640 IFU (Español) (PDF) Select-640 proportional IFU 20.8 (PDF)

  Dosed product from David Welch on Vimeo.
• Select-640 SSD (Single Shot Doser)

  The Select-640 SSD, including the VariSpeed version, dispenses a specific amount of product when activated with a single impulse.

  The impulse can come from a computer generated source, or from (more normally) a single push of a foot switch.

  With the VariSpeed version, on-screen controls let you specify the speed of pumping (see video).

  Select-640 SSD IFU (PDF) Select-640 SSD IFU (PDF)

  640-SSD Vari from David Welch on Vimeo.
• Select-640 Timed SSD

  A doser that can deliver an initial dose on power-up, and then dose x ml each y minutes. Users can change the x and y values.

  640-SSDIP IFU (PDF)
• Select-642 Tandem Doser

  This version of the 640 doser allows for a single product to be pumped at twice the normal rate, or for two different products to be pumped at the same dosing ratio.

  One of the pumps can be slowed to account for any difference in viscosity between the two pumped products.

  642 Technical Data (PDF)
• Select-648 Tandem doser

  Double headed doser with independent control for each side. Two different products can be dosed at completely different ratios.

  Select-648 data sheet (PDF) Select-648 Instructions for Use (PDF)
• Select-650 doser with Tx 010CA65

  This version of the Select-640 has the Tx communications system built into the enclosure.

  Without any additional connections the Select-650 will send water consumption data to the user to indicate possible health issues, and raise Alerts if unforeseen high water flows occur.

  In most areas, a GSM signal will be picked up using the built-in antenna. An external antenna can be attached if required.

  For the normal dosing functions - see the Select-640 proportional doser data sheet.

  Select-650 Data Sheet (PDF) Adddendum ref Tx (PDF)
• Select-G5 Doser

  The high pressure Select Doser.

  This doser can be adapted to be a proportional doser, an AutoDoser or a single shot doser - but crucially can dose into water line pressure up to 7 bar (100psi).

  G5 IFU (PDF) G5 Technical Data (PDF) G5 Livestock IFU (PDF) G5 Livestock Technical Data (PDF)
• Select Water Meter 170CAxx

  The Select Water Meter monitors water flows and displays both the current litre per hour rate (gallons per hour in USA), and the accumulating water total. The total can be easily zeroed for convenient daily total records to be taken.

  Select Water Meter IFU (PDF)
• Water meter with Select-380 doser

  How to read a K = 10 water meter and its connection to a Select-380 doser.

  K=10 Water Meter from David Welch on Vimeo.

Stirring Equipment

• Spinstir range

  If you are dosing powder products, the powder can settle at the bottom of the stock container leading to inaccurate dosing and a waste of expensive product.

  Three sizes of Spinstir are available. The 6-Series (6-240 and 612) for stirring up to 20 litres, the 10-Series (10-12) for stirring up to 100 litres, and finally the 15-series (15-12) for stirring up to 200 litres.

  See the data sheet for Item Numbers. Different Item Numbers are allocated according to the style of stirrer and the method of connection to a power source.

  Spinstir range (PDF)

Flow Sensors

• Mag6020 MFS6020

  The Mag6020 is a flow sensor to measure extremely low water flows down to 2 l/hr (33 ml/min). This is especially useful for trials sites and small numbers of outside livestock units. Can be used with any Select doser.
• MFS Magnetic Flow Sensor 160CA24

  This flow sensor can be used with any Select Doser. If the water you are dosing into is contaminated with particles or debris, you may be advised to use this sensor.

  WARNING - Do not allow this flow sensor to run dry. Inadvertent dosing may occur which could be hazardous.

  This is the most advanced sensor available today. There is no turbine in the sensor - the water flows through an open tube.

  Water flows up to 18,000 l/hr.

  MagFlo data sheet (PDF)
• Select Keypad 160CA30

  The Select Keypad is an input device to tell a Select doser how many Units are to be accounted for. The Select doser will then dose on a ml / Unit basis.

  Select Keypad (PDF)
• TBR 10 Flow Sensor 160CA07

  DISCONTINUED

  This flow sensor can be used with any Select Doser.

  The smallest flow sensor, this one can work with water flows of 3 to 300 l/hr.

  TBR10 Flow Sensor Technical Data (PDF)
• VTH25 Flow Sensor 160CA05

  This flow sensor can be used with any Select Doser.

  This sensor has a 1.25" thread and can operate with water flows up to 10,000 l/hr.

  VTH25 Flow Sensor Technical Data (PDF) VTH25 parts assembly (PDF)
• VTH40 Flow Sensor 160CA08

  This flow sensor can be used with any Select Doser.

  The VTH40 is a robust brass flow sensor that has a maximum water flow rate capacity of 25,000 l/hr. It has a 2" thread.

  VTH40 Flow Sensor Technical Data (PDF)
• VTY10 Flow Sensor 160CA03

  This flow sensor can be used with any Select Doser.

  This is the most frequently used flow sensor. It has a 3/4" thread and can work with a water flow range of 20 to 1,500 l/hr.

  VTY10 Flow Sensor Technical Data (PDF)
• VTY20 flow sensor 160CA20

  This flow sensor can be used with any Select Doser.

  This sensor has a 1" thread and can operate with water flows up to 3,600 l/hr.

  VTY20 Data Sheet (PDF)

Tx

• Level

  A collection of systems to report when liquid levels are low (or overflowing).

  Level brochure (PDF)
• Tx

  A new way to get vital data on livestock health.

  The Tx box collects water flow data and sends a Daily Report to the user's mobile phone with a 4-day comparison. A drop in water consumption can signify an approaching health problem.

  Tx Data Sheet (PDF) Addendum for Select-650 (PDF) Tx Usage Scenarios (PDF) Tx IFUv14 130820 (PDF)

• 380 Roller Assembly - Black 330CA40

  Replacement roller assembly - Black - for the Select 380.
• 380 Roller Assembly - White 330CA30

  Replacement roller assembly - White - for the Select 380.
• 380 Tube Housing cover 350CA20

  Plastic pump head lid cover for the Select 380.
• 480 Motor/encoder/gearbox 165CA00

  Select-480 motor / encoder / gearbox
• 480 Pump head 165CA03

  Select-480 pump head without roller assembly.
• 480 Pump head lid/cover 165CA84

  Clear plastic Select 480 pump head lid/cover only.
• 480 Pump head & roller 165CA01

  Select-480 pump head and rollers.
• 480 Roller assembly 165CA02

  Select-480 roller assembly for pump head.
• 480 Springs for roller 165CA05

  Springs which are fitted into 480 roller assembly.
• 640 hall lead (plaited) 015CA20

  Hall effect lead with magnet sensor.
• 640 Magnet holder/encoder 015CA15

  The magnet encoder plate for the Select-640 that fits under the roller assembly.
• 640 Motor / Gearbox 015CA00

  Motor/encoder/gearbox for Select-640.
• 640 Power supply 5A 019CA05

  5A 12V DC power supply for the Select-640 and Select-380.
• 640 Pump head cover/lid 015CA13

  The pumphead cover/lid only for the Select 640 - including the three screws and washers.
• 640 Pump head & lid only, no rollers 015CA11

  Select-640 pump head and lid only, no roller assembly. With hall effect attachment included.
• 640 Pump head & roller assembly 015CA12

  Select-640 pump head, lid and roller assembly with hall effect attachment included.
• 640 Roller assembly 015CA10

  The roller assembly used in all Select-640 dosers.
• Battery clips & leads with plug to doser 169CA47

  Battery clips and leads for Select-480/640 dosers.
• DC cable & socket 164CA00

  For use as a replacement inside Select doser. dc cable and socket
• Delivery tube 30m 155CA48

  Roll of 30m delivery tube 4.8mm id
• Delivery tube 3m 152CA05

  Delivery tube (3m length) plus end weight (as despatched with dosers).
• Eeprom 190CA15

  Computer chip containing dosing ratio information.
• Enclosure base for Select 480/640 157CA00

  Enclosure base only.
• Enclosure lid for Select 480/640 157CA50

  Enclosure lid only, with the 4 plastic screws.
• EPDM Black injection valve 015CA18

  Alternate non-return injection assembly for dosers.
• Fascia label 165CA81

  Fascia label for Select 480/640
• Foot switch for SSD 305CA00

  Foot switch for all Select SSD models.
• G5 Additional standard pump-head 369CA#7

  An additional G5 pump-head for use with the G5 high pressure pump single head drive shaft. 369CA followed by the tube number to be factory fitted. eg. 369CA#7
• G5 Delivery tube (6m) 385CA27

  Polythene delivery tube (6m) to use with the G5 system.
• G5 Duckbill NRV insert - replacement 385CA25

  Used inside the G5 injection assembly to prevent backflow of water.
• G5 Easy Fit Latching Clip 385CA42

  Latching clip used to fasten pump head lid to the pump head.
• G5 EasyFit Pump Head Housing 385CA44

  EasyFit G5 pump-head housing.
• G5 EasyFit Pump Head Lid/Cover 385CA43

  EasyFit pump head cover which is also used as a wrench tool.
• G5 EasyFit roller assembly 385CA45

  G5 EasyFit roller assembly.
• G5 End weight assembly - replacement 385CA23

  To be used on the suction end of the G5 delivery tube. Has course filter and is weighted with ceramic.
• G5 Extension drive shaft for double pump-head 370CA50

  Drive shaft can be easily fitted to allow for 2 pump-heads to be used with the G5 system
• G5 Extension pump-head 370CA#2

  Extension pump-head to be used on the extension drive shaft to allow 2 pump-heads to be used. The extension pump head to be fitted closest to the motor. Item number is 370CA followed by the tube number to be factory fitted.
• G5 Ferrule (blue) 385CA21

  Ferrule to be used on delivery tube inside the lock nut.
• G5 Gear & washer 385CA31

  G5 gear and washer for use inside motor.
• G5 Hall loom & tube burst 385CA26

  G5 hall loom & tube burst. For use as a replacement for Select-G5.
• G5 Injection assembly - replacement 385CA24

  Injection assembly contains non-return duckbill. 1/2 inch thread.
• G5 Locking nuts 385CA22

  Lock nuts used to keep ferrules in place and to fix the delivery tube to the pump tube, and injection assembly.
• G5 Polythene delivery tube 30m 385CA29

  Roll of 30m polythene delivery tube for G5
• G5 Replacement pump tube #1 380CA#1

  Replacement pump tube #1 for the G5 system. Sold individually.
• G5 Replacement pump tube#7 380CA#7

  Replacement pump tube #7 for the G5 system. Sold individually.
• G5 Roller assembly - replacement 385CA28

  To be used in the G5 pump-head as a replacement after damage.
• G5 Stenner EasyFit Fan Brake Tool 385CA41

  Fan brake tool used to prevent the motor from turning during pump tube replacement in the Select-G5.
• G5 Stenner EasyFit Pump Head 385CA48

  EasyFit pump head for the Select-G5. Roller assembly not included. Pump tube not included.
• G5 Stenner EasyFit Pump Head & rollers 385CA40

  EasyFit pump head complete with roller assembly for the Select-G5. Pump tube not included
• G5 Tube housing cover with bushing 385CA30

  G5 pump head lid cover.
• Injection assembly (female) 153CA10

  Female injection assembly only. 3/8" thread.
• Injection assembly (male) 153CA20

  Barbed connection to PVC delivery tube from doser.
• Injection assembly (M/F) 153CA02

  Acid resistant grey male and female coupling.

  Injector has a 3/8" male thread.
• Magnetic Flow Sensor (MFS) 160CA24

  Pipe sizes: 8mm / 14 mm/ 18 mm / 25 mm Max Flows: 8 mm - 1,500 l/hr 14 mm - 3,600 l/hr 18 mm - 14,400 l/hr 25 mm - 18,000 l/hr

  There is no turbine in this sensor - the water flows through an open tube.
• Non-return valve 156CA00

  For delivery line (4.8mm id) non return valve check
• Parallel connection lead 166CA90

  Parallel connection lead

  To connect up to 25 Select dosers in parallel using a single flow sensor.
• PCB 165CA09

  Printed circuit board for Select dosers.
• pH 4.0 buffer solution - bottle 720CA14

  Buffer solution pH 4.0 460ml bottle
• pH 4.0 buffer solution - sachet 720CA04

  Buffer solution pH 4.0 25ml sachet
• pH 7.0 buffer solution - bottle 720CA17

  Buffer solution pH 7.0 460ml bottle
• pH 7.0 buffer solution - sachet 720CA07

  Buffer solution pH 7.0 25ml sachet
• pH Electrode 710CA00

  pH electrode for pH dosers. Lead length 1m.
• PIC 190CA20

  Computer chip containing the operating program for dosers.
• Plastic enclosure screw 174CA00

  Plastic enclosure screw for lid of Select 480/640. 1 screw.
• Power supply 12V-DC 1.0A 169CA00

  Power supply 12V-DC 1.0 A

  For use with the Select-480 & G5 doser only.
• Pulse Generator 111CA00

  Can be plugged into the Select Doser and the Logger to simulate a water flow. Useful on exhibition stands and for fault diagnosis on-farms.
• Reducing bush 1 1/4" to 3/4" 106CA91

  For connecting T-piece to VTH25.
• Reducing bush 2" to 3/4" 106CA92

  For connecting T-piece to VTH40.
• Reducing bush 3/4" to 3/8" 106CA90

  For use connecting female injection assembly etc.
• Replacement pump tube - Black 161CA08

  Single black pump tube with 2 x connectors
• Replacement pump tube - Blue 161CA16

  Single blue pump tube with 2 x connectors
• Replacement pump tube - Green 161CA32

  Single green pump tube with 2 x connectors
• Replacement pump tube - Green/Yellow 011CA32

  Single green/yellow pump tube with 2 x connectors
• Replacement pump tube - Grey 011CA63

  Single grey pump tube with 2 connectors
• Replacement pump tube - Orange 330CA20

  Replacement pump tube - Orange. Single. For the Select 380.
• Replacement pump tube - Purple 011CA48

  Single purple pump tube with 2 connectors
• Replacement pump tube - Red 161CA48

  Single red pump tube with 2 x connectors
• Replacement pump tubes - Black (10) 161CA08/REP

  Pack of 10 black replacement pump tubes with 4 spare tube connectors.

  For use with Select-480 doser.
• Replacement pump tubes - Blue (10) 161CA16/REP

  Pack of 10 blue replacement pump tubes with 4 spare tube connectors.

  For use with Select-480 doser.
• Replacement pump tubes - Green (10) 161CA32/REP

  Pack of 10 green replacement tubes with 4 spare tube connectors.

  For use with Select-480 doser.
• Replacement pump tubes - Green/Yellow (5) 011CA32/R

  Pack of 5 green/yellow replacement pump tubes with 2 x spare tube connectors.
• Replacement pump tubes - Grey (5) 011CA63/REP

  Pack of 5 grey replacement pump tubes including 2 spare tube connectors.
• Replacement pump tubes - Purple (5) 011CA48/REP

  Pack of 5 purple replacement pump tubes with 2 x spare tube connectors.
• Replacement pump tubes - Red (10) 161CA48/REP

  Pack of 10 red replacement pump tubes with 4 spare tube connectors

  For use with Select-480 doser.
• Replacement pump tube - White 330CA10

  Replacement pump tube - White. Single. For the Select 380.
• Screen 165CA21

  Screen for Select dosers.
• Screen & PCB 165CA04

  Screen and printed circuit board for Select dosers.
• Select 380 c/w power supply and both Orange and White (no sensor) 381CA00

  Select-380 pump box c/w 12V 5A power supply, 6m delivery tube, both orange and white tubes and white and black roller assemblies, water meter connect, injection assembly, end weight, 3 connecting nuts and 3 blue ferrules. No flow sensor.
• Select 388 c/w power supply and both Orange and White (no sensor) 388CA00

  Select-388 pump box c/w 12V 5A power supply, 2 x 3m delivery tube, both orange and white tubes and white and black roller assemblies, water meter connect, 2 x injection assembly, 2 x end weight, 6 connecting nuts and 6 blue ferrules. No flow sensor.
• Select-480 c/w battery clips & TBR10 sensor 160CA51

  As 160CA50 EXCEPT battery clips in place of power supply.
• Select-480 c/w battery clips & VTH25 sensor 160CA26

  As 160CA25 EXCEPT battery clips in place of power supply.
• Select-480 c/w battery clips & VTY10 sensor 160CA11

  As 160CA10 EXCEPT battery clips in place of power supply.
• Select-480 c/w power supply & TBR10 sensor 160CA50

  Select-480 pump box 1.0 A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 3/4" T-piece TBR10 flow sensor with 2 x white reducing bushes Pack of 4 colour-coded pump tubes
• Select-480 c/w power supply & VTH25 sensor 160CA25

  Select-480 pump box 1.0 A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 1 1/4" T-piece with 1 1/4" reducer VTH25 flow sensor Pack of 4 colour-coded pump tubes
• Select-480 c/w power supply & VTH40 sensor 160CA75

  Select-480 pump box 1.0 A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 2" T-piece with 2" reducing bush VTH40 flow sensor Pack of 4 colour-coded pump tubes
• Select-480 c/w power supply & VTY10 sensor 160CA10

  Select-480 pump box 1.0 A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 3/4" T-piece VTY10 flow sensor Pack of 4 colour-coded pump tubes
• Select 480 pH-control 700CA48

  Control box, selection of pump tubes, delivery tube, no electrode.
• Select-480 Solo c/w power supply & no sensor 181CA00

  Select-480 pump box 1.0 A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush Pack of 4 colour-coded pump tubes
• Select-480 Solo (pump box only) 180CA00

  Select-480 pump box only.
• Select-480 SSD 160CA90

  For single output dose on receipt of one pulse signal. Select-480 Single Shot Doser complete with foot switch, delivery tube, 1 x pack of each colour pump tube (4), 1.0A 12V DC power supply and instructions for use.
• Select-480 Tandem c/w power supply & VTH25 160CA57

  Select-480 Tandem (double pump head) 3.8 A 12V power supply 2 x Delivery tubes (3 m) with end weight VTH25 flow sensor 2 x spare pump tubes and activation chamber Instructions for use also included Ideal for seperate component dosing of Chlorine Dioxide
• Select-480 Tandem c/w power supply & VTY10 160CA47

  Select-480 Tandem (double pump head) 3.8 A 12V power supply 2 x Delivery tubes (3 m) with end weight VTY10 flow sensor 2 x spare pump tubes and activation chamber Instructions for use also included Ideal for seperate component dosing of Chlorine Dioxide
• Select 600 c/w power supply, no PCB 010CA81

  Constant output pump without PCB based on Select-640.
• Select-640 c/w battery clips & TBR10 sensor 010CA51

  Same as 010CA50 EXCEPT battery clips in place of power supply.
• Select-640 c/w battery clips & VTH25 sensor 010CA26

  Same as 010CA25 EXCEPT battery clips in place of power supply.
• Select-640 c/w battery clips & VTY10 sensor 010CA11

  Same as 010CA10 EXCEPT battery clips in place of power supply.
• Select-640 c/w power supply & TBR10 sensor 010CA50

  Select-640 pump box 5A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 3/4" T-piece with 2 x white reducing bushes TBR10 flow sensor 2 x purple pump tubes with 2 connectors
• Select-640 c/w power supply & VTH25 sensor 010CA25

  Select-640 pump box 5A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 1 1/4" T-piece with 1 1/4" reducing bush VTH25 flow sensor 2 x purple pump tubes with 2 connectors
• Select-640 c/w power supply & VTH40 sensor 010CA75

  Select-640 pump box 5A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 2" T-piece with 2" reducing bush VTH40 flow sensor 2 x purple pump tubes with 2 connectors
• Select-640 c/w power supply & VTY10 sensor 010CA10

  Select-640 pump box 5A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 3/4" T-piece VTY10 flow sensor 2 x purple pump tube with 2 connectors
• Select 640 pH-control 700CA50

  Control box, selection of pump tubes, delivery tube, no electrode.
• Select-640 Solo Plus c/w power supply (no sensor) 010CA80

  Select-640 pump box 5A 12V power supply Delivery tube (3 m) with end weight Non-return valve Quick fit male/female injection assembly with white reducing bush 2 x purple pump tubes with 2 connectors
• Select-640 Solo (pump box only) 010CA00

  Select-640 pump box only
• Select-640 SSD 010CA90

  Select-640 Single Shot Doser complete with foot switch, 3m silicone delivery tube, 5A 12V DC power supply and instructions for use.

  640 SSD Data Sheet (PDF)
• Select-G52 c/w control box & double G5 motor 362CA1#7

  Large output G5 doser with double motor. Complete with 2 of each of 6m delivery tube, injection assembly with duckbill NRV, ferrules, locking nuts, inlet weights and pump tubes. Power supply & istructions for use also included. Flow sensor not included.
• Select-G5 c/w AUS plug (no flow sensor) 360CA1#1-AUS

  Includes high pressure pump and control box (both board mounted). Tube to be fitted indicated after 360CA - 1#7 is one pump head with tube #7 Also included are: 6m delivery tube, 12V power supply (AUS), injection assembly with duckbill NRV, ferrules, locking nuts, extra pump tube and inlet weight. Flow sensor not included.
• Select-G5 c/w EU plug (no flow sensor) 360CA1#1-EU

  Includes high pressure pump and control box (both board mounted). Tube to be fitted indicated after 360CA - 1#7 is one pump head with tube #7 Also included are: 6m delivery tube, 12V power supply (EU), injection assembly with duckbill NRV, ferrules, locking nuts, extra pump tube and inlet weight. Flow sensor not included.
• Select-G5 c/w UK plug (no flow sensor) 360CA1#1-UK

  Includes high pressure pump and control box (both board mounted). Tube to be fitted indicated after 360CA - 1#7 is one pump head with tube #7 Also included are: 6m delivery tube, 12V power supply (UK), injection assembly with duckbill NRV, ferrules, locking nuts, extra pump tube and inlet weight. Flow sensor not included.
• Select-G5 c/w USA plug (no flow sensor) 360CA1#1-US

  Includes high pressure pump and control box (both board mounted). Tube to be fitted indicated after 360CA - 1#7 is one pump head with tube #7 Also included are: 6m delivery tube, 12V power supply (US), injection assembly with duckbill NRV, ferrules, locking nuts, extra pump tube and inlet weight. Flow sensor not included.
• Select Water Meter with VTH25 sensor 170CA25

  Select Water Meter complete with power supply & VTH25 flow sensor
• Select Water Meter with VTH40 sensor 170CA40

  Select Water Meter complete with power supply & VTH40 flow sensor
• Select Water Meter with VTY10 sensor 170CA10

  Select Water Meter complete with power supply & VTY10 flow sensor
• Sensor lead for VTH25/40 160CA88

  Hall effect sensor lead for the VTH25 and VTH40 flow sensor.
• Sensor wiring loom 163CA05

  Sensor wiring loom complete with connectors fitted.

  For use as a replacement inside Select doser.
• Service Pack for the Select 380 (Orange) 310CA20

  One black roller assembly and 2 orange replacement pump tubes for the Select 380.
• Service Pack for the Select 380 (White) 310CA10

  One white roller assembly and 2 white replacement pump tubes for the Select 380.
• Signal out adaptor leads 166CA00

  Adaptor leads to obtain one pulse out/l or gallon
• Silicone pump tube (6.4mm bore) 3m length 012CA63

  Silicone pump tube (6.4mm bore) (grey size) 3m length.
• Spinstir 10-12 (100L) with follower & 12V power supply 212CA00

  Spinstir 10-12 stirrer complete with 150 mm follower with maximum stock volume 100 litres. 12V power supply.

  10-12 IFU (PDF)
• Spinstir 10-12 (100L) with follower & battery clips 212CA50

  Spinstir 10-12 stirrer complete with 150 mm follower with maximum stock volume 100 litres. Battery clips.

  10-12 IFU battery clips (PDF)
• Spinstir 10-12/15-12 replacement motor (12V) 165CA40

  Replacement motor for both the Spinstir 10-12 and 15-12 (12V).
• Spinstir 15-12 (200L) with follower & 12V power supply 213CA00

  Spinstir 15-12 stirrer complete with 150 mm follower with maximum stock volume 200 litres. 12V power supply.

  15-12 IFU (PDF)
• Spinstir 15-12 (200L) with follower & battery clips 213CA50

  Spinstir 15-12 stirrer complete with 150 mm follower with maximum stock volume 200 litres. Battery clips.

  15-12 IFU battery clips (PDF)
• Spinstir-612 (20L) c/w follower & 12V UK power supply 250CA50

  Spinstir-612 stock stirrer complete with 12V UK power supply

  60mm follower with maximum stock volume 20 litres

  612 IFU (PDF)
• Spinstir-612 (20L) c/w follower & battery clips 250CA00

  Spinstir-612 stock stirrer complete with battery clips. 60mm follower with maximum stock volume 20 litres

  612 IFU battery clips (PDF)
• Spinstir-612 (20L) c/w follower & EU power supply 250CA55

  Spinstir-612 stock stirrer complete with 12V EU power supply 60mm follower with maximum stock volume 20 litres

  612 IFU EU (PDF)
• Spinstir 612 replacement motor (12V) 165CA61

  Replacement motor (12V DC) for 612
• Spinstir 6-240 (20L) with follower & 240V AC 260CA00

  Spinstir 6-240 stirrer complete with 60mm follower with maximum stock volume 20 litres

  6-240 IFU (PDF)
• Spinstir 6-240 replacement motor (240V) 165CA62

  Replacement motor for 6-240 Spinstir (240V AC synchronous)
• Stirrer - 150mm follower 220CA15

  Magnetic stirrer follower for use with the Spinstir 15-12 and 10-12.
• Stirrer - 60mm follower 220CA60

  Magnetic stirrer follower for use with Spinstir 6-240 and 612.
• TBR10 flow sensor 160CA07

  3/4" male threads

  Flow 1 - 1200 l/hr
• Threaded 1 1/4" T piece 106CA25

  Threaded 1 1/4" T piece

  For use with VTH25 sensors
• Threaded 2" T-piece 106CA50

  Threaded 2" T piece

  For use with VTH40 sensors
• Threaded 3/4" T piece 106CA00

  Threaded 3/4" T piece.

  For use with VTY10 and TBR flow sensors
• Threaded insert for VTH25/VTH40 160CA89

  Threaded insert only for VTH25/VTH40 flow sensor.
• Tube connector - blue/black 167CA168

  Acid resistant tube connector to blue and black pump tube.
• Tube connector - green 167CA32

  Acid resistant tube connector to green pump tube.
• Tube connector - red/purple 167CA48

  Acid resistant tube connector to red and purple pump tubes.
• Tube end weight 152CA00

  Tube end weight for 4.8mm id delivery tube
• Turbine only for VTH25/VTH40 160CA87

  Central turbine section as spare for VTH25/VTH40.
• Viton black injection valve 015CA19

  Alternate non-return injection assembly for dosers.
• VTH25 flow sensor 160CA05

  1 1/4" male threads at each end.

  Flow 200 - 10000l/hr
• VTH40 flow sensor 160CA08

  2" male threads at each end.

  Flow 400 - 25000 l/hr
• VTH40 screen 160CA86

  VTH40 screen and clip only.
• VTY10 flow sensor 160CA03

  3/4" male threads at each end with integral signal collector.

  Flow 20 - 1500 l/hr
• Water Meter Connect 166CA01

  Connection cable to water meter.